Mitsubishi Heavy Industries SRK25ZJ-S User Manual (English)

Other manuals for Mitsubishi Heavy Industries SRK25ZJ-S

User Manual24 pages

Technical Manual272 pages

Data Book60 pages

Questions and Answers:

H
hamiltonmariaAug 21, 2025
What to do if my Mitsubishi Heavy Industries SRK25ZJ-S is not cooling well?
- M
  Michael HuffmanAug 21, 2025
  Check if direct sunlight is entering the room. Ensure there isn't a heat source in the room. Also, consider if there are too many people in the room.
A
aguirreshirleyAug 23, 2025
Why is the remote control not working with my Mitsubishi Heavy Industries SRK25ZJ-S Air Conditioner?
- M
  Margaret CurryAug 23, 2025
  If the signal receiver on your Mitsubishi Heavy Industries Air Conditioner is exposed to direct sunlight or other bright light, remote control signals may not be received. Try to block the sunlight or reduce the intensity of the other light source.
K
Kristen FordAug 25, 2025
How to troubleshoot a Mitsubishi Heavy Industries SRK25ZJ-S Air Conditioner that won't turn on?
- P
  perkinsjohnAug 25, 2025
  First, check if the power switch is turned on. Also, verify that the timer hasn't been set to the 'ON' position. Finally, check for a power failure or a blown fuse.
P
Philip MannAug 26, 2025
Why is my Mitsubishi Heavy Industries SRK25ZJ-S not cooling or heating properly?
- B
  barrynolanAug 26, 2025
  Make sure that you have set the thermostat to a suitable temperature. Check if the air filter is clean and not clogged. Ensure that all doors and windows are closed.
A
Amber MorganAug 27, 2025
Why is there no airflow when I start the heating on my Mitsubishi Heavy Industries SRK25ZJ-S Air Conditioner?
- D
  Devin TorresAug 27, 2025
  When starting the heating operation, the airflow may be stopped temporarily to prevent cold air from blowing out until the indoor heat exchanger warms up. This usually takes 2 to 5 minutes, thanks to the HOT KEEP program.
R
Rhonda RojasAug 29, 2025
Why won't my Mitsubishi Heavy Industries SRK25ZJ-S restart after a power outage?
- M
  Martin GrayAug 29, 2025
  If the auto restart function is not set on your Mitsubishi Heavy Industries Air Conditioner, the unit will not restart automatically after a power cut. Use the remote control to start the operation again.
S
Susan MccartyAug 31, 2025
Why is there no airflow when starting the DRY operation on my Mitsubishi Heavy Industries SRK25ZJ-S?
- S
  Shannon CarterAug 31, 2025
  During DRY operation, the indoor fan on your Mitsubishi Heavy Industries Air Conditioner may stop to prevent re-evaporation of dehumidified moisture and to save energy.
C
Christina SchultzSep 1, 2025
Why is there moisture forming on the air outlet grills of my Mitsubishi Heavy Industries Air Conditioner?
- K
  Katie KelleySep 1, 2025
  If your Mitsubishi Heavy Industries Air Conditioner is operated for a long time in high humidity, moisture may form on the air outlet grills and start dripping.
Z
Zachary StephensSep 3, 2025
Why does the fan on my Mitsubishi Heavy Industries Air Conditioner keep running after I turn it off?
- M
  Meredith NelsonSep 3, 2025
  The indoor fan will not stop after 2 hours if set to CLEAN operation. The outdoor fan will not stop for about 1 minute to protect the unit.
M
Miss Lisa TylerSep 4, 2025
Why does my Mitsubishi Heavy Industries SRK25ZJ-S have a slight smell?
- G
  garrettfryeSep 4, 2025
  The air blown out during operation of your Mitsubishi Heavy Industries Air Conditioner may have a slight smell. This can be caused by tobacco or cosmetics adhering to the unit.