To Next PageTo Next PageWhy does the RUN light stay on after stopping my Mitsubishi Heavy Industries SRK35ZJ-S Air Conditioner?
The RUN light illuminates during CLEAN operation. The run light turns off when the CLEAN operation ends.
Why doesn't my Mitsubishi Heavy Industries SRK35ZJ-S restart immediately after being stopped?
The Mitsubishi Heavy Industries Air Conditioner has a built-in delay. Restart is blocked for 3 minutes after you stop it to protect the unit. Please wait for three minutes before restarting.
Why does my Mitsubishi Heavy Industries Air Conditioner blow cold air during heating?
When the outdoor temperature is low and humidity is high, your Mitsubishi Heavy Industries Air Conditioner may automatically defrost. Please wait for the defrosting cycle to complete.
Why is steam escaping from my Mitsubishi Heavy Industries SRK35ZJ-S during COOL operation?
This may occur with your Mitsubishi Heavy Industries Air Conditioner if the room's temperature and humidity are very high. It disappears as soon as the temperature and humidity decrease.
What is the slight gurgling sound from my Mitsubishi Heavy Industries SRK35ZJ-S Air Conditioner?
This sound is caused by refrigerating liquid moving within the Mitsubishi Heavy Industries Air Conditioner unit.
What causes the slight cracking sound in my Mitsubishi Heavy Industries Air Conditioner?
This slight cracking sound from your Mitsubishi Heavy Industries Air Conditioner is caused by heat expansion or contraction.
General| Brand | Mitsubishi Heavy Industries |
|---|---|
| Model | SRK35ZJ-S |
| Category | Air Conditioner |
| Language | English |
Rules and warnings for safe installation of the air conditioner unit.
Important precautions for safe operation of the air conditioner.
Safety measures for moving or repairing the air conditioner.
Identifies and describes the components of the indoor air conditioner unit.
Identifies and describes the components of the outdoor air conditioner unit.
Explains the unit's display indicators and included accessories.
Instructions for replacing remote batteries and using the holder.
Troubleshooting remote failures and using temporary operation.
Detailed explanation of each button on the remote control.
Guide on how to set the current time on the remote control.
How to adjust the temperature when the unit is in AUTO mode.
Instructions for choosing the fan speed in different operating modes.
How to select and operate the main cooling, heating, dry, and fan modes.
Defines the operable temperature limits for cooling and heating.
Details on the mechanism and capacity of the HEAT mode.
How to adjust the up/down and left/right airflow directions.
Instructions for activating and using the 3D AUTO operation mode.
How to set the SLEEP timer for automatic stopping.
Instructions for setting the OFF timer to stop the unit at a specific time.
How to set the ON timer for automatic starting.
How to use SLEEP and ON timers simultaneously.
How to set up combined ON and OFF timers for daily repetition.
How to activate the allergen clearing function.
How to run the SELF CLEAN operation to remove moisture.
How the unit resumes operation after a power cut.
Advice for economical and comfortable use of the unit.
How to adjust airflow based on unit installation position.
Procedures for cleaning the air filter and unit.
How to install and replace allergen and deodorizing filters.
Guidelines for suitable installation positions and noise considerations.
Steps to check when the air conditioner is not working.
Explains common sounds and phenomena during operation.
Situations requiring immediate dealer contact.
Information on using multiple air conditioner units simultaneously.
