To Next PageTo Next PageWhy won't my Mitsubishi Heavy Industries SRK50ZJX-S restart after a power cut?
If your Mitsubishi Heavy Industries Air Conditioner doesn't restart after a power cut, even when power is restored, it's because the auto restart function is not set. Use the remote control to start the operation again.
Why is there no airflow when starting the dry operation on my Mitsubishi Heavy Industries SRK50ZJX-S Air Conditioner?
If airflow stops when starting the DRY operation on your Mitsubishi Heavy Industries Air Conditioner (and the RUN light is on), the indoor fan may stop to prevent re-evaporation of dehumidified moisture and to save energy.
Why is my Mitsubishi Heavy Industries Air Conditioner emitting steam during cooling?
If you notice steam escaping during COOL operation with your Mitsubishi Heavy Industries Air Conditioner, it may occur if the room's temperature and humidity are very high. It should disappear as the temperature and humidity decrease.
Why does my Mitsubishi Heavy Industries SRK50ZJX-S Air Conditioner smell?
If you smell something from your Mitsubishi Heavy Industries Air Conditioner, the air blown out during operation may have picked up odors from tobacco or cosmetics that have adhered to the unit.
General| Cooling Capacity | 5.0 kW |
|---|---|
| Heating Capacity | 6.0 kW |
| Power Supply | 220-240V, 50Hz |
| Indoor Unit Dimensions (W x H x D) | 920 x 305 x 230 mm |
| Outdoor Unit Dimensions (W x H x D) | 780 x 595 x 290 mm |
| Refrigerant | R32 |
| Type | Split System |
