To Next PageTo Next PageWhat to do if my Mitsubishi Air Conditioner does not work?
First, check if the power switch is turned on. Also, verify that the timer hasn't been set to the “ON” position. Finally, check for a power failure or a blown fuse.
Why is my Mitsubishi Air Conditioner not cooling or heating properly?
Make sure that you have set the thermostat to a suitable temperature. Check if the air filter is clean and not clogged. Ensure that all doors and windows are closed.
How to improve the cooling of my Mitsubishi Air Conditioner?
Check if direct sunlight is entering the room. Identify and eliminate any heat sources in the room. Reduce the number of people in the room.
Why isn't my Mitsubishi Air Conditioner responding to the remote control?
Too much sunlight or other light may interfere with the remote control signal. Try to cut out the sunlight or reduce the other light.
Why is the RUN light still on after stopping my Mitsubishi Air Conditioner?
The RUN light illuminates during CLEAN operation.
Why is there no airflow when starting the heating on my Mitsubishi Air Conditioner?
The airflow has stopped to prevent blowing out cold air until the indoor heat exchanger has warmed up.
What to do if my Mitsubishi Air Conditioner is not blowing warm air during heating?
Please wait, the unit may need some time to warm up.
Why is there no airflow when starting the DRY operation on my Mitsubishi Air Conditioner?
The indoor fan may stop to prevent re-evaporation of dehumidified moisture and to save energy.
Why does the fan on my Mitsubishi Air Conditioner keep running after I turn it off?
The fan will not stop after 2 hours if set to CLEAN operation. Also, the fan will not stop for about a 1 minute period in order to protect the unit.
Why is moisture forming on the air outlet grills of my Mitsubishi Air Conditioner?
If the unit is operated for a long time in high humidity, moisture may form on the air outlet grills and start dripping.
General| Cooling Capacity | 7.1 kW |
|---|---|
| Heating Capacity | 8.0 kW |
| Energy Efficiency Class Cooling | A++ |
| Energy Efficiency Class Heating | A+ |
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R32 |
| Outdoor Unit Noise Level | 52 dB(A) |
| Type | Split System |
| Seasonal Energy Efficiency Ratio (SEER) | 6.1 |
Safety requirements and warnings specifically for the installation of the air conditioner unit.
Essential safety measures and warnings to follow during the operation of the air conditioner.
Highlights potential risks and precautions related to unit usage, water, ventilation, and cleaning.
Emphasizes safety measures and warnings for moving or repairing the air conditioner.
Critical warnings and prohibitions regarding the safe handling of the remote control.
Instructions on how to adjust the temperature setting while the unit is in AUTO mode.
Instructions for setting the timer to automatically stop the air conditioner at a specified time.
Explains the feature that resumes the unit's operation after a power interruption.
Steps for removing, cleaning, and reinstalling the air filters.
Guidelines for selecting the optimal location and ensuring correct installation of the unit.
Guide to common issues and checks to perform before calling for service.
