OTE
● Using the “ASC OFF” switch turns off both the stability
control function and the traction control function.
● When moving out of mud, sand or fresh snow, pressing
the accelerator pedal may not allow the engine speed to
increase. In such situations, temporarily turning off ASC
with the “ASC OFF” switch will make it easier to move
out your vehicle.
● If you continue to press the “ASC OFF” switch after the
ASC is turned off, the “mistaken operation protection
function” will activate and the ASC will turn back on.
ASC operation display or ASC OFF display
N00546500075
OTE
● The combination of items shown on the display varies
depending on the vehicle model.
CAUTION
!
● For safety reasons, the “ASC OFF” switch should be
operated when your vehicle is stopped.
● Be sure to keep the ASC on while driving in normal
circumstances.
-
ASC operation display/ASC indicator
The display/indicator will blink when the ASC is operat-
ing.
-
ASC OFF display/ASC OFF indicator
This display/incicator will turn on when the ASC is
turned off with the “ASC OFF” switch.
BK0120400US.book 104 ページ ２０１０年５月１２日 水曜日 午前１０時５０分
To Next Page
Loading...
Need help?
General
