OTE
● Do not connect the USB memory device to the USB input
terminal directly.
The USB memory device may be damaged.
● When closing the floor console box, be careful not to trap
the connector cable.
5. To remove the connector cable, turn the ignition switch to
the “LOCK” position or put the operation mode in OFF
first and perform the installation steps in reverse.
CAUTION
!
● Keep the lid of the floor console box closed while
driving the vehicle. A lid or the contents of the floor
console box could otherwise cause injuries.
BK0120400US.book 232 ページ ２０１０年５月１２日 水曜日 午前１０時５０分
To Next Page
Loading...
