Multi-information display
5-94 Features and controls
5
information screen is switched to the warning
display screen.
Refer to the warning list and take the neces-
sary measures. Refer to “Warning display list
(With ignition switch or operation mode in
ON)” on page 5-109.
When the cause of the warning display is
eliminated, the warning display goes out
automatically.
Even if the cause of the warning display is
not eliminated, you can return to the screen
that was displayed before the warning dis-
play.
If you press the multi-information meter
switch, the display screen switches to the
screen display from before the warning and
the warning (A) is displayed.
When the warning is displayed, if you
lightly press the multi-information meter
switch a few times, the warning display
screen you switched from is redisplayed.
The operation status of each system is dis-
played on the information screen.
For further details, refer to the appropriate
page in the warning display list.
Refer to “Other interrupt displays” on page
5-115.
N00556400064
Shows the position of the selector lever.
Refer to “Selector lever operation” on page
5-49.
N00556500065
Shows the temperature outside the vehicle.
Returning to the display screen from
before the warning display
Warning display screens with a “ ” or
“ ” mark displayed in the upper right of the
screen can be switched. If you want to switch
the display, press the multi-information
meter switch as follows.
“ ”: Press lightly.
“ ”: Press for about 2 seconds or more.
Redisplay of a warning display
screen
To Next Page
Loading...
