Free-hand Advanced Security Transmitter (F.A.S.T.-key) (if so equipped)
Features and controls 5-11
5
2. With the Mitsubishi mark facing you,
insert the cloth-cov-ered tip of a flat blade
screwdriver into the notch in the remote
control transmitter case and use it to open
the case.
3. Remove the remote control transmitter
from the remote control transmitter case.
Then, open the remote control transmitter
using the method described in step 2.
4. Remove the old battery.
5. Install a new battery with the + side (A)
down.
6. Close the remote control transmitter
firmly.
7. Place the remote control transmitter in the
remote control transmitter case, then
securely close the remote control trans-
mitter case.
8. Check the keyless entry system to see that
it works.
N00503100111
The Free-hand Advanced Security Transmit-
ter (F.A.S.T.-key) enables the doors and the
liftgate to be locked and unlocked, the engine
to be started and the operation mode to be
changed simply by carrying it.
Be sure to perform the procedure with the
Mitsubishi mark facing you. If the
Mitsubishi mark is not facing you when you
open the remote control transmitter case, the
buttons may come out.
You may purchase a replacement battery at
an electric appliance store.
An authorized Mitsubishi Motors dealer can
replace the battery for you if you prefer.
When the remote control transmitter case is
opened, be careful to keep water, dust, etc.
out. Also, do not touch the internal compo-
nents.
Free-hand Advanced Secu-
rity Transmitter (F.A.S.T.-
key)
(if so equipped)
BK0206700US.book 11 ページ ２０１４年３月２５日 火曜日 午後４時４２分
To Next Page
Loading...
