Manual transaxle oil (if so equipped)
9-10 Vehicle care and maintenance
9
2. Turn the upper cover over. Squeeze the
head of the moulding clip (C) with pliers
and remove the moulding.
3. Install the upper cover, and then attach the
moulding (D).
4. Install the clips (E).
N00938200178
Whenever the manual transaxle oil level is
checked, add oil to maintain the proper level,
if necessary.
Refill or change the oil according to the table.
N00938101099
The continuously variable transmission
(CVT) should be maintained and serviced by
an authorized Mitsubishi Motors dealer or a
repair facility of your choice to obtain the
best performance and longest life. It is impor-
tant that the transmission fluid is kept at the
correct level.
Use only “Mitsubishi Motors Genuine
CVTF-J4” transmission fluid to ensure opti-
mum transmission performance.
Do not use any fluid additives to the trans-
mission.
Attach the moulding with the wide part
toward the front of the vehicle.
Manual transaxle oil (if so
equipped)
Oil type
Lubricant
Mitsubishi Motors Gen-
uine NEW MULTI
GEAR OIL API Classi-
fication GL-3
Viscosity range SAE 75W-80
Continuously variable
transmission (CVT) fluid
(if
so equipped)
Fluid type
To Next Page
Loading...
