Mitsubishi 2015 OUTLANDER SPORT/RVR - Page 165

Multi-information display
5-102 Features and controls
5
2. Lightly press the multi-information meter
switch to select “LANGUAGE” (lan-
guage setting).
3. Press and hold the multi-information
meter switch (for about 2 seconds or
more) to display “LANGUAGE” (lan-
guage setting).
4. Lightly press the multi-information meter
switch to select the desired language.
5. Press and hold the multi-information
meter switch (for about 2 seconds or
more) to change the setting to the selected
language.
N00557400117
You can turn off the operation sounds of the
multi-information meter switch and rheostat
meter illumination button.
1. Press and hold the multi-information
meter switch (for about 2 seconds or
more) to switch from the setting mode
screen to the menu screen.
Refer to “Changing the function settings
(With ignition switch or operation mode is
in ON)” on page 5-98.
2. Lightly press the multi-information meter
switch to select “ ” (operation sound
setting).
3. Press and hold the multi-information
meter switch (for about 2 seconds or
more) to switch in sequence from ON
(operation sound on)  OFF (operation
sound off)  ON (operation sound on).
The setting is changed to the selected con-
dition.
NOTE
 If the battery is disconnected, the memory of
the language setting is erased and is automat-
ically set to ENGLISH.
Type 1
Type 2
 If “---” is selected in the language setting, a
warning message is not displayed when there
is a warning display or interrupt display.
Operation sound setting
NOTE
NOTE
 If the battery is disconnected, the memory of
the operation sound setting is erased and is
automatically set to “ON” (operation sound
on).
Type 1
Type 2
BK0206700US.book 102 ページ ２０１４年３月２５日 火曜日 午後４時４２分
Information Provided by: