Mitsubishi 2015 OUTLANDER SPORT/RVR - Page 221

USB input terminal (if so equipped)
5-158 Features and controls
5
5. To remove the USB connector cable, turn
the ignition switch to the “OFF” position
or put the operation mode in OFF first and
perform the installation steps in reverse.
N00566900088
1. Park your vehicle in a safe place and turn
the ignition switch to the “OFF” position
or put the operation mode in OFF.
2. Open the USB input terminal cover (A) in
the floor console box.
3. Connect the Dock connector (C) to the
iPod (B).
4. Connect the Dock connector (C) to the
USB input terminal (D).
5. To remove the Dock connector, turn the
ignition switch to the “OFF” position or
put the operation mode in OFF first and
perform the installation steps in reverse.
CAUTION
 Keep the lid of the floor console box closed
while driving the vehicle. A lid or the con-
tents of the floor console box could other-
wise cause injuries.
NOTE
 Do not connect the USB memory device to
the USB input terminal directly.
The USB memory device may be damaged.
 When closing the floor console box, be care-
ful not to trap the USB connector cable.
How to connect an iPod
NOTE
 Use a genuine Dock connector from Apple
Inc.
CAUTION
 Keep the lid of the floor console box closed
while driving the vehicle. A lid or the con-
tents of the floor console box could other-
wise cause injuries.
NOTE
 When closing the floor console box, be care-
ful not to trap the connector cable.
BK0206700US.book 158 ページ ２０１４年３月２５日 火曜日 午後４時４２分
Information Provided by: