Manual air conditioning-Type 1 (if so equipped)
Comfort controls 7-7
7
N00731101287
Set the mode selection dial to the “ ” posi-
tion and set the air selection switch (A) to the
outside air position.
Turn the temperature control dial clockwise
or counterclockwise to the desired tempera-
ture. Select the best speed to fit your needs.
N00731201350
For ordinary cooling
1. Set the mode selection dial to the “ ”
position.
2. Push the air selection switch (A) to set it
to the outside air position.
3. Push the air conditioning switch (B).
4. Change the temperature by turning the
control dial clockwise or counterclock-
wise.
5. Set the desired blower speed.
Sometimes, for example after using a high-
pressure car wash, the condenser can get wet,
and the air conditioning indicator light (A)
blinks temporarily. Wait for a while, press
the air conditioning switch once to turn the
system off, then once more to turn it back on.
Once the water evaporates, the blinking will
stop.
Operating the air conditioning
system
Heating
If the outside air is dusty or contaminated in
some way, push the air selection switch (A)
to set it to the recirculation position. Let in
some outside air from time to time for good
ventilation.
BK0206700US.book 7 ページ ２０１４年３月２５日 火曜日 午後４時４２分
To Next Page
Loading...
