Replacement of light bulbs
9-32 Vehicle care and maintenance
9
N00901901103
1. Turn the cap (A) counterclockwise to
remove it.
2. Turn the bulb (B) counterclockwise to
remove it.
3. While holding down the tab (C), pull out
the socket (D).
4. To install the bulb, perform the removal
steps in reverse.
N00900300099
Do not attempt to disassemble or repair head-
lights, and do not attempt to replace their
bulbs.
Headlights (high beam)
*- Front of the vehicle
*- Front of the vehicle
Handle halogen light bulb with care. The gas
inside a halogen light bulb is highly pressur-
ized, so dropping, knocking, or scratching a
halogen light bulb can cause it to shatter.
Never hold the halogen light bulb with a bare
hand, dirty glove, etc.
The oil from your hand could cause the bulb
to break the next time the headlights are
used.
If the glass surface is dirty, clean it with
alcohol and let it dry completely before
installing the bulb.
Headlights (low beam, for vehi-
cles equipped with high inten-
sity discharge headlights)
To Next Page
Loading...
