Replacement of light bulbs
9-34 Vehicle care and maintenance
9
3. Pull the bulb out of the socket.
1. To install the bulb, perform the removal
steps in reverse.
2. Install the upper cover.
For information regarding how to install
the upper cover, refer to “Removing and
installing the upper cover and duct” on
page 9-9.
N00943500137
N00943601816
1. Insert a straight blade (or minus) screw-
driver with a cloth over its tip into the
light cover (A) and pry gently to remove
it.
2. Remove the screws (B) and remove the
light unit.
To install
Side turn signal lights
It is not possible to repair or replace only the
bulb for the side turn signal light.
Check with an authorized Mitsubishi Motors
dealer or a repair facility of your choice
when the light needs to be repaired or
replaced.
Front fog lights (if so equipped)
When unfastening the screws, be careful not
to move the beam position adjustment screw
(C).
BK0206700US.book 34 ページ ２０１４年３月２５日 火曜日 午後４時４２分
To Next Page
Loading...
