Paddle Shifters (GT only)
Seat Heater Switch (if equipped)
Position Action
HI - For quick heating
NEUTRAL - Heater off
LO - To keep the seat warm
Drive Mode Selector (if equipped)
The drive mode can be switched
by pressing the drive mode button
while the ignition switch is in the ON
position.
Pressing the button will change the
drive mode in order to:
AWC ECO, NORMAL, SNOW, LOCK
Cruise Control / Adaptive Cruise Control (if equipped)
Simply upshift or
downshift with a tap of
your fingers – without
moving your hands from
the steering wheel.
You can return to the “D”
operation by pulling the +
(SHIFT UP) side paddle
shifter rearwards (toward
the driver) and holding
for over 2 seconds.
A - CANCEL: To deactivate the ACC or cruise control
B - RES +: To increase the set speed or resume
control after cancelling the ACC or cruise
control function.
C - SET-: To set the desired speed and to reduce the
set speed.
D - ON / OFF: To turn cruise control ON or OFF
E - ACC Distance Switch - Used to set or change the
following distance between your vehicle and the
vehicle in front of you.
To set a cruising speed
1. Press D and the “ACC” (if equipped) or “CRUISE” indicators will appear in the multi
information display.
2. Accelerate or decelerate to your desired speed (above 25 mph). Press C and remove your
foot from the accelerator pedal.
To accelerate or decelerate speed
Push up B to increase set cruising speed.
Push down C to decrease set cruising speed.
To cancel the cruising speed Press A or press brake pedal, or press D .
A
B
C
D
E
To Next Page
Loading...
Need help?
General
