To Next PageTo Next PageHow to fix Mitsubishi Controller parameter setting range errors?
To resolve parameter setting range errors, set the correct value in the parameter for which the error occurred, and then turn ON the PLC READY signal [Y1D].
General| Category | Controller |
|---|---|
| Model | A1SD75P1-S3 |
| Manufacturer | Mitsubishi |
| Number of control axes | 1 |
| Weight | 0.2 kg |
| Power Supply | 24V DC |
| Current Consumption | 0.6 A |
Explains the basic contents for understanding positioning control using AD75.
Describes the devices required for positioning control using AD75.
Details AD75 functions and performance specifications.
Covers procedures for installing, wiring, and maintaining the AD75, including precautions.
Explains parameters and data required for positioning control, including system and control data.
Details the procedures and settings for zero point return control.
Explains details and examples of main positioning controls using positioning data.
Details advanced positioning controls using start block data and condition data.
Explains manual control operations like JOG and manual pulse generator.
Details auxiliary functions that assist main functions for compensation and control adjustments.
Explains common functions like parameter initialization, data backup, and LED display.
Provides information on errors and warnings detected by the AD75 and their remedies.
Lists common positioning control issues and their recommended solutions.
Provides a comprehensive list of buffer memory addresses and their corresponding items.
