To Next PageTo Next Page
Need help?Do you have a question about the Mitsubishi A1SJH and is the answer not in the manual?
General| Type | PLC |
|---|---|
| Series | MELSEC-A |
| Program Capacity | 8K steps |
| Number of I/O points | 256 points |
| Memory Type | RAM |
| Communication Ports | RS-232C |
| Operating Temperature | 0 to 55 °C |
| Storage Temperature | -25 to 75 °C |
| Number of Extension I/O Modules mountable | 7 |
| I/O Points | 256 |
| Power Supply | 24 V DC |
| Humidity | 5 to 95% RH (non-condensing) |
Precautions related to the design of the PLC system and its components.
Guidelines for safely installing the PLC system and its modules.
Instructions for correctly wiring the PLC system to prevent electrical hazards.
Procedures for safely starting up and maintaining the PLC system.
Guidelines for the safe and environmentally sound disposal of the product.
Instructions for safely transporting the product, especially batteries.
General introduction to the AnSHCPU series PLC, its functions, and handling.
Key capabilities and characteristics of the AnSHCPU series PLC.
Describes the general system configurations and component devices of the AnSHCPU.
Discusses hardware and software compatibility and considerations for system setup.
Lists the modules and devices that can be used within an AnS system.
Provides an outline of AnSHCPU system configurations, I/O points, and allocations.
Outlines the general environmental and physical specifications for the PLC.
Details the performance capabilities, memory, and processing specifications of the AnSHCPU.
Describes the various functions and operational modes of the AnSHCPU module.
Provides instructions for safely handling and installing AnSHCPU and related modules.
Identifies the parts of the AnSHCPU module and explains their settings.
Lists the technical specifications for various power supply modules used with the system.
Identifies the parts of the power supply modules and explains their settings.
Details the specifications for base units and extension cables, including dimensions and capacity.
Identifies the parts of base units and extension cables and explains their identification.
Explains the procedure for mounting and removing base units on a DIN rail.
Describes the specifications and handling of memory cassettes used for program storage.
Details the specifications, handling, and installation of the battery for memory backup.
Essential safety considerations for loading, installation, and system design to prevent hazards.
Specifies the recommended environmental conditions for installing the AnSHCPU system.
Explains how to calculate heat generation for proper panel design and thermal management.
Provides instructions for properly mounting modules onto base units for ventilation and stability.
Details the procedures for installing and removing I/O and special function modules.
Instructions for installing and removing the dustproof cover to protect against foreign matter.
Provides comprehensive wiring instructions for the PLC system, including power and I/O connections.
Outlines precautions when connecting the PLC system to an uninterruptive power supply.
Outlines requirements for electromagnetic compatibility and standards compliance.
Discusses conformity requirements for low-voltage directives and applied standards.
Procedures for daily checks of the PLC system components and indicators.
Guidelines for semi-annual or annual inspection of the PLC system for optimal performance.
Instructions for replacing the battery to maintain memory backup and power interruption compensation.
Fundamental steps and principles for diagnosing and resolving PLC system issues.
Explains procedures for identifying causes of problems, errors, and corrective actions.
Provides a list of error codes, their causes, and corrective actions for troubleshooting.
Addresses common problems with I/O circuits and offers solutions.
Lists and explains sequence, basic, and application instructions used with the AnSHCPU.
Details special relays and registers used for PLC operations and diagnostics.
Highlights differences and precautions when migrating from AnSCPU to AnSHCPU.
Provides dimensional drawings for CPU modules, power supply modules, and base units.
Guidelines for safely transporting products, especially batteries, according to regulations.
Details the warranty period and the scope of coverage for product failures.
Explains the terms for product repairs after production has been discontinued.
Information regarding repair services available through Mitsubishi's overseas FA Centers.
Outlines limitations on Mitsubishi's liability for consequential damages.
States that product specifications may change without notice.
Defines acceptable applications for the PLC and exclusions for high-risk industries.
