Mitsubishi ECLIPSE 2011 User Manual

3-68
Features and controls
3
Vehicles equipped with 6-speed manual transaxle
Pull up the pull-ring (A), then move the gearshift lever to the
“R” (Reverse) position with the pull-ring still pulled.
The pull-ring will return to its original position when you
return the gearshift lever to the “N” (Neutral) position.
CAUTION
!
● Do not pull up the pull-ring (A) when moving the
gearshift lever to any position other than the “R”
(Reverse) position. If you always pulled up the pull-
ring (A) when moving the gearshift lever, you could
unintentionally move the gearshift lever to the “R”
(Reverse) position and cause an accident and/or a
problem in the transaxle.
CAUTION
!
● If the pull-ring will not return from the pulled-up
position, have the vehicle inspected at an authorized
Mitsubishi Motors dealer or at a repair facility of
your choice.
BK0115900US.book 68 ページ ２００９年１０月２７日 火曜日 午後１２時１分
Information Provided by:

Mitsubishi ECLIPSE 2011 Specifications

General

Brand	Mitsubishi
Model	ECLIPSE 2011
Category	Automobile
Language	English