3-92
Features and controls
3
To activate
N00518400170
1. Momentarily push in the main switch (A) at the end of the
cruise control lever.
2. Pull the lever (B) down while driving at the desired speed.
OTE
● If the main switch is on when the ignition key is turned
off, cruise control will be on automatically the next time
you start the engine. The “CRUISE” indicator will also be
on. You will need to reset the speed however, if you want
to use cruise control.
● If the battery voltage is insufficient, the memory data for
the main switch will be erased.
As a result, the “CRUISE” indicator may not come on
when you restart the engine.
If this happens, push in the main switch once again to acti-
vate the system.
BK0115900US.book 92 ページ ２００９年１０月２７日 火曜日 午後１２時１分
To Next Page
Loading...
