Mitsubishi ECLIPSE 2011 User Manual

Vehicle care and maintenance
7-5
7
Support the engine hood with the hood prop. Insert the hood
prop securely in the opening under the hood marked with an
arrow.
To close
Unlatch the prop from the engine hood and put it back in its
retainer.
Slowly lower the engine hood about 12 inches (30 cm), then let
it drop from its own weight.
N
OTE
● If this does not close the engine hood properly, drop it
again from a slightly higher position.
CAUTION
!
● Always insert the support prop into the hole spe-
cially made for it. Propping the engine hood at any
other place could cause the prop to slip out and lead
to an accident.
● The hood prop can fall out if the hood is lifted by a
strong wind.
CAUTION
!
● Be careful not to trap your hands or fingers when
closing the engine hood.
BK0115900US.book 5 ページ ２００９年１０月２７日 火曜日 午後１２時１分
Information Provided by:

Mitsubishi ECLIPSE 2011 Specifications

General

Brand	Mitsubishi
Model	ECLIPSE 2011
Category	Automobile
Language	English