Vehicle care and maintenance
7-9
7
Recommended engine oil viscosity
SAE 5W-20 engine oil is strongly recommended for optimum
fuel economy and cold starting.
To replace the oil filter
The oil filter should be replaced at the time or mileage speci-
fied in the “WARRANTY AND MAINTENANCE MAN-
UAL”.
Only use high quality replacement filters on this vehicle. The
manufacturer’s specifications for Genuine Mitsubishi oil filters
require that the filter can withstand a pressure of 256 psi
(1.8 MPa). A Genuine Mitsubishi oil filter is the best replace-
ment filter.
Follow the installation instructions printed on the filter.
CAUTION
!
● Take care not to bend the oil filter cover when
replacing the oil filter.
BK0115900US.book 9 ページ ２００９年１０月２７日 火曜日 午後１２時１分
To Next Page
Loading...
Need help?
General
