Features and controls
3-41
3
4. From inside the vehicle, insert the two retainer pegs (E)
all the way into mountings provided (F).
5. Align the locking pins (D) with the holes (G) in the vehi-
cle. Slide the locking pins (D) toward the outside and
insert them in the holes to retain the wind deflector. Make
sure that the wind deflector is securely installed in the
vehicle.
E
F
D
G
BK0098300US.book 41 ページ ２００８年１２月８日 月曜日 午前１１時３７分
To Next Page
Loading...
