Mitsubishi ECLIPSE SPYDER

3-42
Features and controls
3
N
OTE
● When you insert the locking pins (D) into the holes (G),
they may be stiff. If this happens, adjust each locking pin
(D) to a length that enables secure retention of the wind
deflector. To adjust the length of each locking pin (D),
turn the end of the locking pin using a screwdriver.
6. Raise the top frame to the full upright position as illus-
trated.
BK0098300US.book 42 ページ ２００８年１２月８日 月曜日 午前１１時３７分