Mitsubishi ECLIPSE SPYDER

7-62
Vehicle care and maintenance
7
6. To install the bulb, perform the removal steps in reverse.
N
OTE
● When mounting the light unit, align the clip (F), pins and
bolts (J) on the light unit with the holes in the body.
ECLIPSE SPYDER
1. Open the trunk lid.
Push the center of the clips (A) and remove them. Then
remove the cover (B).
BK0098300US.book 62 ページ ２００８年１２月８日 月曜日 午前１１時３７分