Mitsubishi FDT125VNPWVH - Outdoor Unit Operational Controls

'22 • PAC-SM-412
-
26
-
(i) Powersaving
/
comfort control
Thesettemperatureisadjustedaccordingtothepresenceofpeopleandtheiramountofactivitydetectedbytheinfrared(motion)
sensor.
(ii)Auto-ocontrol
Whennoactivityisdetectedfor1hour,unitwillgostand-bymode.
※
Unit will re-start operation automatically with the
originalsettemperaturebyactivitydetection during the stand-by mode.Whenstand-bymodecontinuesfor12hours,
unit stops.
※
Compressorkeepsstoppedregardlessofthesettemperature.
Notes(1)Whenthefollowingoperationsareset,powersavingcontrolwillbecanceled.
①
Energy-saving,Homeleavemode,Warm-upcontrol,Coolingoperationcheck.
②
WhentheoperationmodeischangedDRYorFAN.
(2)Notoperablewhiletheair-conditionerisOFF.
Low
When the extent of human
activity is low
High
When the extent of human
activity is high
None
When there is no one in the
room
• When the “None” continues for 1 hour, the
FANSPEEDissetLo.
MODE:AUTO/COOL/HEAT mode operation
COOL
HEAT
Set
temperature
-3ºC
33ºC
15ºC
+3ºC
Heat Source & Activity Low
Normal
High None