Mitsubishi FDUA125VNPWVH - Page 105

■Set ON timer by hour
When the set time elapses, the air conditioner starts.
1
Tap the
Menu
button on the TOP screen and select
Useful functions ⇒ Timer ⇒ Set ON timer by hour
.
2
The Set ON timer by hour setting
screen is displayed.
Select desired hours for the period to
start operation by timer with the
▲ ▼
buttons.
Range of setting time: 1 to 12 hours (at
1-hr intervals)
3
When operating conditions at the start
of operation are set, tap the
Next
button. (
☞
4 )
When operating conditions are not set,
tap the
Set
button.
4
Set the following operating conditions.
①
Warming up ON/OFF
(the Main R/C only)
②
Operation mode … ☞5
③
Set temp … ☞6
④
Fan speed … ☞7
⑤
Zones … ☞9
■Warming up setting can be made with the
main R/C only.
■Set the operation mode before setting the
set temperature.
dna noitarepo pu gnimraw tsal eht no desab noitarepo eht fo emit trats eht setamitse retupmocorcim eht ,noitarepo eht fo emit trats tes eht ta erutarepmet tes eht ot desolc erutarepmet moor eht pu mraw oT ·
starts the operation 5 to 60 minutes earlier.
.remit yb noitarepo trats eht naht erom ro reilrae ruoh eno ta remit eht tes ,NO denrut si pu gnimraw eht nehW ·
If it is set in less than one hour, a message
“
Warming up cancelled
”
is displayed on the screen. (This is used as the Set ON timer by hour and clock.)
Advice Warming up
Set ON timer by hour
Set Back
hours
Tap ▲▼ to set clock time & tap [Set].
A/C will start at the set hours later.
CancelNext
5
Tap a desired operation mode.
If the
No setting
button is tapped, it
starts operation at the last action. (
☞
4 )
Cooling
Set ON timer by hour
No setting Back
Please select operation mode.
Fan
Heating
Dry
Auto
7
.deeps naf derised a paT
If the
No setting
button is tapped, it
operates at the last action. (
☞
4 )
8
After setting the desired contents at the
screen of the step 4
above, tap the
Set
button.
Operation will start at set hours later.
6
Select a desired temperature (at 1°C
intervals) with the
▲ ▼
buttons. Or tap the
Auto
button and select the auto
temp setting.
Tap the
Set
button after the
adjustment. (
☞
4 )
When the
No setting
button is
tapped, “
-- °C” is displayed, and it
starts operation at the last setting
temperature.
Set ON timer by hour
No setting Back
Select the fan speed.
Auto
Set ON timer by hour
No setting Back
Tap
▲▼
to set temp & tap [Set].
Auto
Set
9
Tapping the
Zones
button makes it
possible to perform zone operation
settings at the time of timer working. Set
No
setting / ON / OFF (No setting/
OPEN/CLOSE) for each zone during
timer operation.
→
No setting
→
ON
→
OFF
Setting No setting will operate in the
previous zone state at the time of timer
working.
After the setting, tap the Set
button.
The display returns to the previous
screen.
'22 • PAC-SM-412
-
104
-