■Set OFF timer by hour
When the set time elapses, the air-conditioner stops.
1
Tap the
Menu
button on the TOP screen and select
Useful functions
⇒
Timer
⇒
Set OFF timer by hour
.
2
The Set OFF timer by hour setting screen is displayed.
Select desired hours to stop operation with the
▲
▼
buttons.
Range of setting time: 1 to 12 hours (at 1-hr intervals)
3
The
Zones
button is displayed when performing zone settings. Tapping the
Zones
button makes it possible to perform zone
operation settings at the time of timer working. (The
Zones
button is not displayed when not performing zone settings. Proceed to step
5
.)
4
Tapping the
Zones
button will transition to the zone operation setting screen. Set No
setting / ON
/ OFF
(No setting/OPEN/
CLOSE) for each zone during timer operation.
→
No setting
→
ON
→
OFF
Setting No setting
will operate in the previous zone state at the time of timer working.
After the setting, tap the Set
button.
The display returns to the previous screen.
5
After the setting, tap the Set
button. The display returns to the Timer menu screen.
Set ON timer by clock
Starts the operation of the unit at the set clock time.
1
Tap the
Menu
button on the TOP screen and select
Useful functions
⇒
Timer
⇒
Set ON timer by clock
.
2
The Set OFF timer by hour setting screen is displayed.
Select a desired time to start operation (5-min intervals) with the
▲
▼
buttons.
3
When operating conditions at the start of operation are set, tap the
Next
button to set operation conditions. (
☞
4 )
If operating conditions are not set, tap the
Set
button.
The Set ON timer by clock can be operated one day (Once) or every day.
If it is operated everyday, tap the
Once
/
Everyday
button to change the display to “Everyday”.
Set ON timer by clock
Set Back
Once
Tap ▲▼ to set clock time & tap [Set].
A/C will start at the set clock time.
CancelNext
AM
4
Set the following operating conditions.
①
Warming up ON/OFF (the Main R/C only)
②
Operation mode … ☞5
③
Set temp … ☞6
④
Fan speed … ☞7
⑤
Zones … ☞9
■Warming up setting can be made with the main R/C only.
■Set the operation mode before setting the set temperature.
Set ON timer by clock
'22 • PAC-SM-412
-
105
-
To Next Page
Loading...
