dna noitarepo pu gnimraw tsal eht no desab noitarepo eht fo emit trats eht setamitse retupmocorcim eht ,noitarepo eht fo emit trats tes eht ta erutarepmet tes eht ot desolc erutarepmet moor eht pu mraw oT ·
starts the operation 5 to 60 minutes earlier.
.remit yb noitarepo trats eht naht erom ro reilrae ruoh eno ta remit eht tes ,NO denrut si pu gnimraw eht nehW ·
If it is set in less than one hour, a message
“
Warming up cancelled
”
is displayed on the screen. (This is used as the Set ON timer by hour and clock.)
Advice Warming up
5
Tap a desired operation mode.
If the
No setting
button is tapped, it
starts operation at the last action. (
☞
4 )
Cooling
Set ON timer by hour
No setting Back
Please select operation mode.
Fan
Heating
Dry
Auto
7
.deeps naf derised a paT
If the
No setting
button is tapped, it
operates at the last action. (
☞
4 )
8
After setting the desired contents at the
screen of the step 4 on the previous
abore, tap the
Set
button.
Operation will start at set hours later.
6
Select a desired temperature (at 1°C
intervals) with the
▲
▼
buttons. Or tap the
Auto
button and select the auto
temp setting.
Tap the
Set
button after the
adjustment. (
☞
4 )
When the
No setting
button is
tapped, “
--
°C” is displayed, and it
starts operation at the last setting
temperature.
Set ON timer by hour
No setting Back
Select the fan speed.
Auto
Set ON timer by hour
No setting Back
Tap
▲▼
to set temp & tap [Set].
Auto
Set
9
Tapping the
Zones
button makes it
possible to perform zone operation
settings at the time of timer working. Set
No
setting
/
ON
/ OFF (No setting/
OPEN/CLOSE) for each zone during
timer operation.
→
No setting
→
ON
→
OFF
Setting No setting
will operate in the
previous zone state at the time of timer
working.
After the setting, tap the Set
button.
The display returns to the previous
'22 • PAC-SM-412
-
106
-
To Next Page
Loading...
