13-21
5 Replacing the interior/personal lamp
1. Remove the lens by pulling the bottom of it
toward you.
2. Remove the bulb while pushing it down.
3. Install the new bulb by pushing it into position.
4. Install the lens by first fitting the lugs at its top
into the holes in the lamp body and then
pushing the bottom of the lens into position.
6 Replacing other lamps
1. Loosen the screw that secures the lens then
remove the lens.
2. Turn the bulb counterclockwise while pressing it
and remove it.
3. Insert a new bulb and turn it clockwise.
4. Fit the lens, ensuring that the packing is cor-
rectly positioned. If the packing is incorrectly
installed or twisted, water can enter the lamp
and shorten its life.
Z13649
Z13650
FKFM.book Page 21 Wednesday, January 28, 2009 9:21 AM
To Next Page
Loading...
