5-32 Switches and controls
• By using the accelerator pedal and speed set
switch
1. Use the accelerator pedal to reach the desired
speed.
2. When the desired speed is reached, turn the
“SET/RESUME” switch to the “SET” position.
The vehicle will cruise at the current speed.
3 To decrease the set speed in cruise con-
trol mode
Turn the “SET/RESUME” switch to the “SET” posi-
tion. The vehicle will decelerate. When the desired
speed is reached, release the switch. The vehicle
will cruise at the new, lower speed.
4 To accelerate temporarily in cruise con-
trol mode
Depress the accelerator pedal as you do in normal
accelerating. When the pedal is released, the vehi-
cle will cruise at the set speed again.
Z11829
Z11832
Z11832
Z11829
FKFM.book Page 32 Wednesday, January 28, 2009 9:21 AM
To Next Page
Loading...
