FX2N-5A Special function block External Dimensions and Parts 2
2-2
1) Direct mounting hole (2-
φ
4.5) (0.18)
2) Extension cable
3) Power indicator lamp (LED)
5V power is supplied from the programmable controller to light this indicator lamp.
4) Power supply terminals (Screw terminal: M3 (0.12))
5) Analog output terminals (Screw terminal: M3 (0.12))
6) Analog input terminals (Screw terminal: M3 (0.12))
7) 24V power indicator lamp (LED) 24V DC power is supplied to the terminals of the FX
2N
-5A
to light this indicator lamp.
8) AD/DA conversion indicator lamp (LED)
Flashes at a high speed if AD/DA conversion is performing without a problem.
9) DIN rail mounting clip
10)DIN rail mounting slot (width of DIN rail: 35mm 1.38")
To Next Page
Loading...