FX2N-5A Special function block Buffer Memory (BFM) 7
7-48
Scaling function setting procedures
The Scaling function is set according to the following procedure.
1) Please make a set change in the I/O characteristic permission (BFM19=K1).
↓
2) Please write the mode which uses the Scaling function in BFM0 and BFM1.
↓
3) Please write the value of BFM200 to 249 allocated to the analog input/output channel.
↓
4) Make the value of BFM200 to 249 effective by analog input channel of writes I/O
characteristics.
To Next Page
Loading...