Chapter1:Gettingto KnowYourVCR
t Overviewofthe RemoteControl
m
__
6--
7--
8--
@®®]
Dk_pLAy_3'I_DEO VOLUME CI¢_NN_L
R_*JV pLAY/STO p_ I_ FF
OREC MEaN PAUSE
9
--10
--11
--12 13
--14
15
--16
--17
18
Q) TV and VCR buttons (TV, VCR)
In addition to operating your VCR, your
VCR remote control can be used to operate
most of the functions of many brands of
televisions. Press the VCR button to use
the remote to operate the VCR. After
setting up your remote for your particular
brand of television, press the TV button to
use the remote to operate your television.
See your TV owner's guide for more
information about operating your TV.
(_) number buttons
Use these buttons to select TV stations or
to set Quick searching time.
(_) cancel button (CANCEL)
Use this button to cancel selections on the
®
®
®
®
®
®
@
on-screen menus or to reset the counter
display to "0H00M00S."
display button (DISPLAY)
Press this button to display the following
information on the television:
• how much time has elapsed on the
current tape,
• the channel number and audio recep-
tion mode you are watching,
• the audio channel(s) you selected
during playback,
• the source that is supplying the VCR
with a signal,
• the present time,
• whether the VCR is stopped, playing,
or recording, and
• how much time is left on the tape.
This button can also be used to turn on
and off the "Child Lock" feature.
function button (AUDIO/VIDEO)
Press this button to adjust the VCR's
audio and video functions.
mute button (MUTE)
Press this button to turn offthe sound
completely or to restore it to its previous
volume.
rewind, reverse search and adjust
- button (REW, ADJUST)
Press this button to rewind a tape or to
reverse search. You can also use this
button to control the playback speed of a
tape. When using the on-screen menus,
use this button to select or adjust items.
record button (REC)
Press this button to start recording. When
recording, you can use the button to add a
manual index mark.
VCIUTV button (VCRITV)
Press this button to switch between the
VCR's tuner and the TV's tuner. When
you select '_v-CR," you change channels on
the VCR; when you select "TV," you
change channels on the TV.
power button (POWER)
Press this button to turn the VCR on or
off. If you have programmed the VCR to
record, you need to turn the VCR off.
8
J18
To Next Page
Loading...
Need help?
General
