SPECIFICATIONS
Tape Format
Power Source
Power Consumption
Video Signal System
Video Recording System
Luminance
Color Signal
Hi-Fi Audio
Recording System
Linear Audio Track
Tape Speed
Record/Playback Time
Heads: Video
Hi-Fi Audio
Audio/Control
Erase
Video Input
Audio Input
Video Output
Audio Output
Tuner VHF
UHF
CATV
Operating Temperature
Relative Humidity
RF Channel Output
Weight
Dimensions
Timer Program Capacity
Deck
: S-VHS/VHS 1/2” high-density
video cassette tape
: 120V AC ; 60 Hz
: Approx. 25 W
:
EIA standard ;
NTSC color
: S-VHS standard
: Frequency modulation recording
: Low frequency conversion
sub-carrier phase shift recording
: VHS standard
Azimuth helical scanning system
: 1 track
: 1-5/16 i.p.s (standard play)
7/16 i.p.s (extended play)
: 120min. with T-120 video
cassette (SP mode)
360min. with T-120 video
cassette (EP mode)
: 4 rotary heads
: 2 rotary heads
: 1 stationary head
: 1 full track head
: 0.5 to 2.0 V(p-p), 75Ω
unbalanced RCA pin Jack
: 346 mV(rms), 47 kΩ
unbalanced RCA pin Jack
: 1.0 V(p-p), 75 Ω unbalanced
RCA pin Jack
: 346 mV(rms), 1 kΩ unbalanced
RCA pin Jack
: 54~88 MHz, 174~216 MHz
: 470~806 MHz
: 54~88 MHz, 90~804 MHz
: 41 °F to 104 °F
: 30 % to 80 %
: Channel 3 or 4 switchable
: Approx. 8.4 lbs
: 16.7”(W) × 3.7”(H) × 11.8”(D)
: 1 month programmable
/ 8 programs
: α Deck
• Weight and dimensions shown are approximate.
• Design and specifications are subject to change without notice.
Only cassettes marked S-VHS or VHS can be used with this video cassette recorder.
2002
VIDEO CASSETTE RECORDER
MITSUBISHI DIGITAL ELECTRONICS AMERICA, INC.
9351 Jeronimo Ave. Irvine, California 92618 U.S.A.
Copyright C 2002 Mitsubishi Digital Electronics America, Inc. All Rights Reserved.
MODEL
HS-U778
To Next Page
