To Next PageTo Next Page
Need help?Do you have a question about the Mitsubishi Limiservo X G Series and is the answer not in the manual?
General| Type | Servo Motor |
|---|---|
| Manufacturer | Mitsubishi |
| Encoder | Incremental or Absolute (depending on model) |
| Protection Class | IP65 (standard) |
| Ambient Temperature | 0°C to 40°C (operation) |
| Vibration Resistance | 5.9 m/s² (varies by model) |
| Shock Resistance | 49 m/s2 |
| Cooling Method | Natural cooling or forced air cooling (varies by model) |
Guidelines for safe operation, covering application, environment, and precautions.
Procedures for installing the motor, control box, cables, and grounding.
Explanation of symbols indicating potential risks and warnings.
Important points to observe before operation, installation, and during use.
Steps for securely mounting the motor using bolts and washers.
Procedures for attaching the control box to the motor.
Steps for wiring and connecting the sewing machine to the control box.
Diagram and procedure for connecting 3-phase power, including grounding.
Checklist of items to confirm before turning on the power supply.
Steps to verify correct operation after turning on the power.
How to adjust the UP and DOWN stopping positions using detector plates.
How to set maximum, low, and operation speeds using the control panel keys.
How to switch between normal mode and various program modes, including types and selection methods.
Table listing error codes, probable causes, and inspection steps.
