Mitsubishi Limiservo XC-GMFY User Manual

Mitsubishi Limiservo X G series
TECHNICAL INFORMATION MANUAL
Motor XL-G554-10(Y), XL-G554-20(Y),
XL-G754-20(Y)
Control box XC-GMFY
Induction type AC servo motor
and control box with automatic
needle positioner
Thank you for purchasing this product.
Please read this manual thoroughly before use to ensure safe and proper use.
Please read the instruction manual for the machine head together with this manual.
Save this manual for future reference.
E723D700-C(201407)

Mitsubishi Limiservo XC-GMFY Specifications

General

Type	AC Servo Motor
Series	Limiservo XC
Rated Speed	3000 rpm
Maximum Speed	5000 rpm
Protection Class	IP65
Rated Torque	0.64 Nm
Power Supply	AC 200V
Feedback	Incremental
Voltage	200V
Communication	SSCNET III/H

Summary

Safety Instructions

To Ensure Safe Use

Guidelines for safe operation and handling of the drive unit.

Installation Guidelines

Procedures and precautions for proper installation of motor and control box.

Maintenance and Repairs

Instructions for maintaining and repairing the control unit.

Installation

Motor Installation

Steps for securely installing the motor onto the table.

Control Box Installation

Procedures for mounting the control box onto the motor.

Pulley Installation

Belt Mounting

Position Detector Installation

Sewing Machine and Control Box Connection

Wiring instructions for connecting units.

Confirmation

Pre-Operation Checks

Power On Verification

Adjustments

Stopping Position Adjustment

How to adjust UP and DOWN stopping positions using the detector.

Pedal Pressure Adjustment

Operation Speed Adjustment

Setting maximum, low, and operation speeds.

Changing Solenoid and Output Voltage

Solenoid Voltage Change (DC24V/DC30V)

Output Voltage Change (0VDC/5VDC)

Operation of the Control Switch Panel Keys

Displays and Key Functions

Explanation of normal mode displays and key operations.

Program Mode Selection

Direct Number Call Function

Using the Normal Mode

Program Mode [1] Simple Setting

Setting specific machine models using program mode [1].

Program Mode [2] Simple Setting

Setting chain stitch machines using program mode [2].

Program Mode [3] Simple Setting

Setting lock stitch machines using program mode [3].

How to Use the Option Connector

Connector Layout

Error Display