To Next PageTo Next Page
Need help?Do you have a question about the Mitsubishi MDS-A-SVJ-20 and is the answer not in the manual?
General| Rated Output | 2.0 kW |
|---|---|
| Voltage Class | 200 V |
| Input Voltage | 3-phase AC 200V to 230V |
| Control Method | Sine Wave PWM Control |
| Protection Functions | Encoder Error |
| Cooling Method | Natural Cooling |
| Ambient Temperature | 0 to 55°C |
| Storage Temperature | -20°C to 65°C |
| Vibration Resistance | 5.9 m/s² (0.6G) or less |
Provides an overview of the manual's scope and related documents.
Details software version changes affecting functions and related parameters.
Details individual servo parameters, their settings, ranges, and functions.
Lists available motor types and their corresponding codes for parameter setting.
Lists detector systems and their corresponding codes for parameter setting.
Details regeneration resistor combinations and their compatibility with servo amp models.
Explains the servo amp's monitor output channel and D/A output specifications.
Describes how to match machine movement to commands using electronic gearing parameters.
Explains how and when parameter changes become effective for system safety.
Defines command polarity and its effect on motor direction.
Provides default parameter values for various motor types and amp capacities.
Provides detailed explanations for servo alarm codes, their causes, and reset procedures.
Explains servo warning codes, their causes, and reset methods.
Identifies parameter numbers causing initial parameter errors and their probable causes.
Discusses operating capacity limitations for 100V servo amps and potential alarms.
