Mitsubishi MDS-A-SVJ Series

Visit us on the web:
www.servo-repair.com
www.servorepair.ca
www.ferrocontrol.com
www.sandvikrepair.com
www.accuelectric.com
For 24/7 repair services :
USA: 1 (888) 932 - 9183
Canada: 1 (905) 829 -2505
Emergency After hours: 1 (416) 624 0386
Servicing USA and Canada
Scroll down to view your document!
Over 100 years cumulative experience
24 hour rush turnaround / technical support service
Established in 1993
The leading independent repairer of servo motors and drives in North America.

Mitsubishi MDS-A-SVJ Series Specifications

General

Brand	Mitsubishi
Model	MDS-A-SVJ Series
Category	Controller
Language	English

Summary

Introduction

Functions and Related Parameters

Servo Parameters

Parameter Descriptions

Explains individual servo parameters, their functions, and setting ranges.

Motor Types

Guides setting the motor/detector type (SV025:MTYP) for servo configuration.

Detector Types

Details detector systems and their compatibility with motor types and resolution.

Regeneration Resistors Types

Lists connectable regeneration resistor combinations based on servo amp capacity.

DA Output Channel

Describes the servo amp's monitor output channel and D/A output specifications.

Electronic Gearing

Explains how to match machine movement to commands using electronic gearing.

Parameter Changes

Outlines safety precautions and effectiveness of parameter modifications.

Command Polarity

Defines command polarity and its effect on motor direction (CW/CCW).

Standard Parameters by Motor Type

Provides standard parameter values for various motor types and amp capacities.

Servo Alarms and Warnings

Alarm Descriptions

Details specific servo alarms, their causes, and reset methods.

Warning Descriptions

Lists servo warnings, their causes, and reset procedures.

Initial Parameter Error Numbers

Identifies initial parameter errors, their causes, and related parameters.

100 V Servo Amps

Discusses operating capacity limitations and voltage considerations for 100V servo amps.