Mitsubishi MDS-A-SVJ Series - Parameter Descriptions

“2 .,\._ . e,
1 MDS-A-SVJ
I
3.1
Parameter Descriptions
I
Parameter Descriptions
rester vibration
r type used (see Stan
Parameters
ates projections with low-spee
of zero gives no correction gain; a setting of 100 gives
is type is standard with the MDS-A-SVJ series.
use when type-l correction is insufficient, e.g., with high-speed,
high-precision interpolation.
a different value setting is
- to + (with clockwise command
+ to - (with clockwise command
carried out during command speed
-5-
BNP-B3882B