9
ECONO COOL OPERATION
Use this operation when you want to be comfortable in COOL mode even with energy saved.
Perform the following operations while the unit is operat-
ing in the MANUAL COOL mode.
■
Press the
button.
When the (ECONO COOL) operation is selected in COOL mode, the air
conditioner performs swing operation vertically in various cycle according to
the temperature of air conditioner.
Also SET TEMPERATURE is automatically set 4°F higher than in COOL mode.
To release the ECONO COOL operation:
■
Press the
button or the button is pressed or the operation mode
is changed during the ECONO COOL operation, ECONO COOL operation
is released.
• The
button and ON/OFF timer (explained below)
are available.
What is “ECONO COOL”?
Swing air flow (change of air flow) makes you feel cooler than constant air flow. So, even though the set temperature is
automatically set 4°F higher, it is possible to perform cooling operation with keeping comfort. As a result, energy can be saved.
POWERFUL OPERATION
Use this operation when you want to cool/heat your room within a short time period.
Perform the following operations while the unit is operat-
ing in the MANUAL COOL/HEAT mode.
■
Press the button.
The air conditioner automatically adjusts the fan speed and the set tempera-
ture, and operates the POWERFUL mode. The POWERFUL mode is auto-
matically released 15 minutes after operation starts, and the operation mode
returns to the mode prior to POWERFUL operation.
POWERFUL mode
* Exclusive for POWERFUL mode
** When the position of the horizontal vane is set to
(AUTO) during cooling
operation, the air is blown downward.
To release the POWERFUL mode before it is released au-
tomatically:
■
Press the button again.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
■
POWERFUL mode is also released in the following ways:
• By pressing the
To Next Page
Loading...
