EasyManua.ls Logo

Mitsubishi Mr.Slim MSZ-FE18NA - Cleaning and Maintenance Procedures; Air Filter Cleaning Guide

Mitsubishi Mr.Slim MSZ-FE18NA
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
instructions:
Switch off the power supply or turn off the breaker before cleaning. Use only diluted mild detergents.
Be careful not to touch the metal parts with your hands. Do not expose parts to direct sunlight, heat, or fire to dry.
Do not use benzine, thinner, polishing powder, or insecticide. Do not use water hotter than 120°F (50°C).
Air filter (Nano platinum filter)
Remove dirt by a vacuum cleaner, or rinse with water.
Afterwashing with water, dry it well in shade.
What is =ENano platinum filter"?
Nano platinum is a ceramic particle that includes a platinum nanoparticle.
The particles are incorporated into the filter material, which results in pro-
viding semi-permanent antibacterial and deodorizing characteristics for the
filter. Nano platinum surpasses the catechin (a bioflavonoid that is found
in green tea) in performance. Nano platinum filter uses this compound not
only to improve air quality but also to eliminate bacteria and viruses. This air
filter has a semi-permanent lasting effect even after washing it with water.
Air cleaning filter
(Electrostatic anti-allergy enzyme filter)
Every 3 months:
Remove dirt by a vacuum cleaner.
When dirt cannot be removed by vacuum cleaning:
Soak the filter and its frame in lukewarm water before rinsing it.
After washing, dry itwell in shade.
Every year:
Replace it with a new air cleaning filter for best performance.
Parts Number_
Clean the filters regularly for best performance and to
reduce power consumption=
Dirty filters cause condensation in the air conditioner
which wii! contribute to the growth of fungi such as
mold. it is therefore recommended to clean air filters
every 2 weeks=
Front panel
Hole /
1. Lift the front panel until a "click" is heard.
2. Hold the hinges and pull to remove as shown in the left illustration.
, Wipe with a soft dry cloth or rinse it with water.
, Do not soak it in water for more than two hours.
, Dry it well in shade.
3. Install the front panel by following the removal procedure in reverse. Close
the front panel securely and press the positions indicated by the arrows.
II
En-8

Related product manuals