To Next PageTo Next Page
Need help?Do you have a question about the Mitsubishi Mr.Slim PKA-A-GA and is the answer not in the manual?
General| Brand | Mitsubishi |
|---|---|
| Model | Mr.Slim PKA-A-GA |
| Category | Air Conditioner |
| Language | English |
Safety measures for environment, relocation, electrical work, and test run preparation.
Specifies required clearances for indoor unit installation and maintenance.
Refers to the outdoor unit installation manual for dimensions.
Lists accessories included with the indoor unit and their placement.
Details on setting the wall mounting fixture and drilling piping holes.
Ensures secure mounting fixture installation for safety.
Procedures for embedding refrigerant and drain pipes into the wall.
Steps to prepare the indoor unit for piping and wiring connections.
Instructions for attaching the indoor unit to the wall mounting fixture.
Safety and material precautions for R410A refrigerant and piping.
Steps for connecting liquid and gas pipes, insulation, and tightening flare nuts.
Guidance on positioning refrigerant and drain pipes and cutting knockout holes.
Detailed steps for connecting refrigerant pipes to the indoor unit.
Guidelines for installing drain pipes, ensuring proper inclination and insulation.
Procedures for wiring the indoor unit, including terminal block connection.
Connection patterns for indoor unit power supplied from the outdoor unit (A-control).
Connection patterns for separate power supplies for indoor and outdoor units (A-control).
Connection patterns and DIP switch settings for K-control application.
Procedures for installing wired and wireless remote controllers.
How to set various functions for the unit via the remote controller.
Detailed steps for selecting unit functions like power voltage and unit number.
Essential checks before performing the test run, including leakage and wiring.
Steps to perform a test run using the wired remote controller.
Steps to perform a test run using the wireless remote controller.
Instructions for using SW4 in the outdoor unit for testing.
How to perform a self-check using the wired remote controller.
How to perform a self-check using the wireless remote controller.
Steps to activate and use the maintenance mode for displaying unit data.
How to fix operation frequency and stabilize the unit's operation.
