9
Operation Example
(When Setting Supercool chilling)
To Cancel the Setting/Cancel in the Middle
In
2
and
3
, touching
returns the display to the previous state.
In the following cases, the display may not change even when you touch it.
Wipe the moisture and dirt off your fi ngers.
Perform operations with your hands. After you have touched an icon, confi rm that the display has changed before touching again.
The response may vary, depending on the surrounding temperature, humidity, the health condition of the person who operates it,
and the operating condition of neighboring electric appliances.
Detail Setting
Pages 21 - 25
When you keep the door of the refrigerator open,
touch
for about 1 second. (until the buzzer
sounds once)
1
Touch
Touch
Operable icons light
up.
The operation
panel or your
fi ngers are wet
or dirty.
The interval between
touches is too short.
(Pressing repeatedly
may cause a
misdetection)
It lights up for 5
seconds after
setting.
3
The text above the
touched icon lights up.
The text above the
icon will disappear.
Touch the icon
to cancel
2
Touch
1
The
compartment
being set
brightly lights
up.
You are wearing gloves or
have sticking plaster on your
fi nger.
Touch the icon to set
Here touch .
2
3
Confi rm the setting details
and compartment, then
touch
.
Operation
Panel
To Next Page
Loading...
Need help?
General
