QUICK GUIDE
Remote Control For GE Series
MSZ-GE22VA | MSZ-GE25VA | MSZ-GE33VA | MSZ-GE35VA | MSZ-GE42VA | MSZ-GE50VA
Timer ConTrols
seT a sTop Time
First press and then TIME to increase, or TIME ,
to decrease the stop time by 10 minute increments.
seT a sTarT Time
First press
and then TIME to increase, or TIME ,
to decrease the start time by 10 minute increments.
Display iCons
operaTing moDe
Fan speeD
VerTiCal air FloW
HoriZonTal airFloW
TemperaTUre
CloCk / Time
air FloW ConTrols
aDjUsT Fan speeD
Press to select a fan speed from the following options:
aDjUsT VerTiCal airFloW
Press to select a vertical airflow direction from the following
options:
AUTO HIGHMEDIUMLOW SUPER HIGH
AUTO 1 2 3 4 5 SWING
TemperaTUre ConTrols
reDUCe TemperaTUre
Press to move the target temperature down by 1 degree
inCrease TemperaTUre
Press to move the target temperature up by 1 degree
poWer
on / oFF BUTTon
Turn the Heat Pump on or off
CHange moDe
Press to change between the following modes:
aUTo Unit automatically adjusts itself to heat or cool to
maintain the set temperature
Cool Operates in Cooling Mode, supplying cool air
Dry Operates in Dehumidifying Mode. In this mode the unit is
not trying to reach the set temperature.
HeaT Operates in Heating Mode, supplying warm air
eConomiCal Cooling
Press to start or stop Economical Cooling. This changes the
unit to ‘swing’ airflow to create a breeze effect
moDe seleCTion