ENGINE
Mounting
bolts
Removing radiator
mounting
bolt
(0)
Loosen radiator mounting bolts, right and
left, and take down the radiator from the
chassis.
(11) Disconnect fuel return pipe from fuel tank.
(2)
Turn
off
fuel filter cock, and remove the
fuel pipe between filter and injection
pump.
(13) Disconnect engine control rod from
gover-
nor
lever.
(14) Disconnect drag link from steering lever.
Ball socket
Cotter pin
. Removing drag
link
(5)
Disconnect oil pipes from
the
hydraulic
pump, making sure
that
"0"
rings come
out
of
the pipe connections.
2-12
In
case
of
MT180H/HD, remove cooler
outlet pipe and cooler in let pipe.
Removing oil pipe (engine side)
(16) Place a jack under the clutch housing, and
operate the jack to push up
the
housing
lightly.
(17) Remove the bolts securing the chassis:
there are two bolts on front side and a
total
of
eight on right and left sides.
Remove
the
chassis gently.
Removing
chassis
f
(
(
(2
To Next Page
Loading...
Need help?
General
