13
NOTE:
Disconnecting the 12V starter battery may make it impossible to perform operations related to electrical
components. Perform the necessary operations before removing the 12V starter battery terminal.
1. Electric power windows / Door lock
Power window
1 : Driver’s door window
2 : Front Passenger’s door window
3 : Rear left door window
4 : Rear right door window
5 : Window lock switch
Door lock
1 : Lock
2 : Unlock
NOTE:
When you operate the switch on the driver's side, all doors are locked / unlocked
interlock.
2. How to parking brake to apply and parking brake release
・To apply
1) Pull up the Electric parking brake switch while depressing the brake pedal.
2) When the parking brake is applied, the brake warning light (red) in the instrument cluster will come on.
Make sure that the brake warning light (red) in the combination meter and the indicator light in the switch are lit.
CAUTION:
- When applying the electric parking brake, stepping on the brake pedal firmly, stop completely the vehicle, and then pull
up the switch.
・To release
Manual operation
1) Make sure that the operation mode of the electric motor switch is ON.
2) Press down the Electric parking brake switch while depressing the brake pedal.
3) When the parking brake is released, the brake warning light (red) go off.
Electric parking brake switch
Electric parking brake switch
Brake warning light
For U.S.A
For CANADA/MEXICO
Brake warning light
For U.S.A
For CANADA/MEXICO
To Next Page
Loading...
Need help?
General
