4
1.Identification / recognition
1. Features on vehicle exterior
OUTLANDER PHEV shares one vehicle body with petrol engine models. Therefore, their exteriors are very similar.
If you find any of the following features which can identify OUTLANDER PHEV, always wear appropriate Personal
Protective Equipment (PPE).
WARNING:
- Use insulating Personal Protective Equipment (PPE) (Rubber insulating gloves, Rubber soled insulating shoes:
rated to a minimum of 500V voltage resistance), when contact with the vehicle body is possible, until you can
identify whether the vehicle is OUTLANDER PHEV or not.
- Engine noise does not always mean that the vehicle is a model with petrol engine.
(1) Feature list
OUTLANDER PHEV can be identified by the “PLUG-IN HYBRID EV" logo, battery charging lid, chassis number
(model code) and the power drive unit (PDU) cover.
The "PHEV (PLUG-IN HYBRID EV)" logo is installed on the left and right sides of the fender panel and on the liftgate.
(2) Features on exterior
(1) "PLUG-IN HYBRID EV" logo mark on the left and right front fenders
(2) "PHEV" logo mark on the liftgate
<18MY to 19MY is Right side.> <20MY to 22MY is Left Side>
(3) "Battery charging lid" on the right rear panel
NOTE:
There is no Battery charging lid except for PHEV vehicles. The left rear panel is the "Fuel filler lid".
To Next Page
Loading...
Need help?
General
