EasyManua.ls Logo

Mitsubishi Outlander PHEV 2019

Mitsubishi Outlander PHEV 2019
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
46
How to drain the water
On the following to collect the water.
Remove the special tools on the underside of the drain plug, and wait until drainage from the drain plug is completed.
When draining water, set the tray under the drain plug and collect the drained water.
Wait for at least approx. 84 hours (3.5 days), and then drain water from the pool.
Remove the special tools from the bottom of the drain plug, and wait until the water has drained
completely. Place a suitable tray under the drain plug to collect the drained water.
How to drain the remaining water
1) Use an open end wrench (12mm) to remove the service hole lids on the bottom of the main drive lithium-ion
battery and drain the main drive lithium-ion battery.
2) Remove the ground bracket.
3) Remove the service hole lid.
CAUTION:
The water drained from the drive battery shall be properly disposed of as an industrial waste according to local regulations.
Bottom view
Ground
Ground
Ground
Bottom view
Front side
Service hole lid
(Front)
Service hole lid
(Rear)
Service hole lid (Rear)
*Quick charge type only

Other manuals for Mitsubishi Outlander PHEV 2019

Related product manuals