Mitsubishi PBV20N2 - Page 125

© Mitsubishi Forklift Trucks 2013. All © Mitsubishi Forklift Trucks 2013. All rights reserved.rights reserved. Revision: BRevision: B
Document ID: 615023Document ID: 615023
124 (244)124 (244)



PBV20N2 PBV20N2 Service Service ManualManual
At the traction moAt the traction motor end, the cator end, the cable and wiring ble and wiring lengths mulengths must be correct to prest be correct to preventvent
insulation damage, seeinsulation damage, seeFigure 73.Figure 73.If If you have to disassemble the factory-installed cableyou have to disassemble the factory-installed cable
set, remember to reassemble the cables and wires with the set, remember to reassemble the cables and wires with the correct lengths, in thecorrect lengths, in the
correct order and making sure they are correct order and making sure they are not twisted.not twisted.
Figure 73. Correct cable and wiring lengthsFigure 73. Correct cable and wiring lengths
https://www.forkliftpdfmanuals.com/