© Mitsubishi Forklift Trucks 2013. All © Mitsubishi Forklift Trucks 2013. All rights reserved.rights reserved. Revision: BRevision: B
Document ID: 615023Document ID: 615023
143 (244)143 (244)
PBV20N2 PBV20N2 Service Service ManualManual
11
11 TruckTool TruckTool DiagnosticsDiagnostics
Software maintenance can be performed with a Software maintenance can be performed with a diagnostics applicatiodiagnostics application calledn called
TruckTool. This program runs on a laptop PC and TruckTool. This program runs on a laptop PC and connects to the truck's data busconnects to the truck's data bus
(CAN) via a (CAN) via a special adapter and wire harness.special adapter and wire harness.
TruckTool can be used to receive, display and modify settings, update (flash) controllerTruckTool can be used to receive, display and modify settings, update (flash) controller
firmware, reset settings to hardware defaults, review and clear firmware, reset settings to hardware defaults, review and clear alarms, performalarms, perform
calibrations, execute a quick truck calibrations, execute a quick truck setup and monitor digital and analogue inputs andsetup and monitor digital and analogue inputs and
outputs.outputs.
The TruckTool program’s usage instructions are available in The TruckTool program’s usage instructions are available in the application itself.the application itself.
Additional traiAdditional training is requirening is required to use the pd to use the program.rogram.
Figure 85. TruckTool DiagnosticsFigure 85. TruckTool Diagnostics
To Next Page
Loading...
